Cisco 350-601 Certification All-in-One Exam Guide Nov-2023 [Q242-Q264]

Cisco 350-601 Certification All-in-One Exam Guide Nov-2023

Get Real 350-601 Exam Dumps [Nov-2023] Practice Tests

NEW QUESTION # 242
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right

Answer:

Explanation:

Explanation
A, B, F, D, C, E

NEW QUESTION # 243
An engineer deploys a custom Guest Shell rootfs on a Nexus 9000 Series Switch. Drag and drop the steps from the left into the order required to deploy the solution on the right. Not all options are used.

Answer:

Explanation:

NEW QUESTION # 244
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once

Answer:

Explanation:

Explanation
Diagram Description automatically generated

NFS:
-Used to boot VMDK files
-Uses lease-based model for file locking
-Used to provide shared storage for hypervisors
SMB/CIFS:
-Used to boot VHDX files
-Used to provide shared storage for hypervisors

NEW QUESTION # 245
Refer to the exhibit.

What is a characteristic of the UUID in the service profile presented.

A. allocated from a UUID pool
B. unique system generated
C. vendor assigned
D. based on the hardware

Answer: A

NEW QUESTION # 246
Refer to the exhibit.

What is the result of implementing this configuration?

A. The switch queries the TACACS+ server by using a clear text PAP login.
B. The TACACS+ server uses the type-6 encrypted format.
C. The timeout value on the TACACS+ server is 10 seconds.
D. The switch queries the TACACS+ server by using an encrypted text PAP login.

Answer: D

Explanation:
tacacs-server key
To configure a global TACACS+ shared secret key, use the tacacs-server key command. To remove a configured shared secret, use the no form of this command.
tacacs-server key [0 | 7] shared-secret
Syntax Description
7 (Optional) Configures a preshared key specified in encrypted text to authenticate communication between the TACACS+ client and server.

NEW QUESTION # 247
Refer to the exhibit.

Which setting must be configured to prevent reuse of passwords?

A. Change Count
B. No Change Interval
C. Change Interval
D. History Count

Answer: D

NEW QUESTION # 248
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

Answer:

Explanation:

Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>

NEW QUESTION # 249
Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

A. IOMs
B. Cisco UCS Manager
C. BIOS
D. adapters
E. board controller

Answer: A,B

NEW QUESTION # 250
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP?
(Choose two.)

A. script signed with security key
B. POAP feature license
C. TFTP server that contains the configuration script
D. image noted in the script file against switch bootflash
E. DHCP server to bootstrap IP information

Answer: C,E

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/troubleshooting/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_ Troubleshooting_Guide_7x_chapter_01100.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/fundamentals/configuration/ guide/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x/ b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x_chapter_0100.html

NEW QUESTION # 251
An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that is located at IP
192.168 20.1 that moots those requirements
* Only HTTP. RDP. and ICMP traffic is permitted from subnet 192.168.10.0/24.
* The committed information rate must be 54000 pps.
* The burst size must be 128 packets.
* Any other traffic must be dropped.
Drag and drop the code snippets from the bottom onto the blanks in the code on the top to complete the configuration. Not all code snippets are used

Answer:

Explanation:

Explanation
Text Description automatically generated

NEW QUESTION # 252
Which two statements describe modifying Cisco UCS user accounts? (Choose two.)

A. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.
B. Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.
C. The password of the user account must contain a minimum of 10 characters.
D. The admin account is used only to log on by using SSH.
E. The password of the user account expires in 30 days.

Answer: A,B

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem

NEW QUESTION # 253
Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

A. Specify a maintenance time by selecting a schedule.
B. Associate a service profile to the maintenance policy.
C. Set the soft shutdown timer to a specific time.
D. Set the policy to apply the change on the next reboot.

Answer: C

NEW QUESTION # 254

Refer to the exhibit During a vPC peer switch reload, there is packet loss between the server and the router Which action must be taken to prevent this behavior during future reloads?

A. Decrease the OSPF hello and dead interval timers.
B. Disable vPC ARP synchronize on the vPC peers.
C. Set the routed uplink ports of the Cisco Nexus peers as orphans.
D. Increase the vPC delay restore timer.

Answer: D

NEW QUESTION # 255
What is a benefit of Cisco HyperFlex All-Flash Stretched cluster deployment as compared to All-HDD Stretched cluster deployment?

A. higher number of IOPS
B. higher cost
C. lower number of IOPS
D. lower cost

Answer: A

NEW QUESTION # 256
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)

A. check the impact of the upgrade using the show install all impact command
B. free up space on the USB3 device by deleting old Cisco NX-OS image files
C. back up the configuration
D. disable Cisco Fabric Services
E. make the primary supervisor the active supervisor

Answer: A,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_2/upgrade/guides/nx-os/ upgrade.html

NEW QUESTION # 257
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?

A. Option C
B. Option D
C. Option B
D. Option A

Answer: C

NEW QUESTION # 258
A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containenzed applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution. Which product must be used to meet these requirements?

A. Cisco CloudCenter
B. Cisco Workload Optimization Manager
C. Cisco Data Center Network Manager
D. Cisco Intersight

Answer: A

NEW QUESTION # 259
A POAP-enabled Cisco Nexus switch will not enter POAP mode.
Which two conditions should be verified? (Choose two.)

A. The license file is missing on the switch.
B. Bootflash must contain a special directory named POAP with poap.py file.
C. No Cisco NX-OS image is present on the bootflash.
D. The switch is in bootup process.
E. No startup configuration is available.

Answer: D,E

Explanation:
Section: Automation

NEW QUESTION # 260
A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog. Which solution meets these requirements?

A. Cisco UCS Director
B. Cisco Workload Optimization Manager
C. Cisco Data Center Network Manager
D. Cisco Intersight

Answer: C

NEW QUESTION # 261
A network administrator must create a Linux container on a Cisco Nexus Series Switch. The container requires 10 percent of the CPU of the switch and 1024 MB of RAM to run successfully. Which task provides the necessary resources?

A. Modify resource allocation with the virtual-service resize command.
B. Enable the Bash shell of the switch with the feature bash command
C. Increase the compute resources with the guestshell resize command.
D. Edit the container properties with the guestshell run command.

Answer: C

NEW QUESTION # 262
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

A. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
B. The monitoring of Fibre Channel traffic is limited to the default VSAN.
C. Fibre Channel traffic is monitored only on one vHBA per server.
D. The destination port for monitoring must be an unassigned Fibre Channel port.

Answer: C

Explanation:
You can monitor Fibre Channel traffic using either a Fibre Channel traffic analyzer or an Ethernet traffic analyzer. When Fibre Channel traffic is monitored with an Ethernet traffic monitoring session, at an Ethernet destination port, the destination traffic is FCoE. The Cisco UCS 6300 Fabric Interconnect supports FC SPAN only on the ingress side. A Fibre Channel port on a Cisco UCS 6248 Fabric Interconnect cannot be configured as a source port.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System- Monitoring/3-2/b_UCSM_GUI_System_Monitoring_Guide_3_2/ b_UCSM_GUI_System_Monitoring_Guide_3_2_chapter_01101.pdf

NEW QUESTION # 263

Refer to the exhibit. Which configuration ensure that the cisco Nexus 7000 series switches are the primary devices for LACP?
A)

B)

C)

D)