[Apr 19, 2026] Pass C-P2WBW-2505 Review Guide, Reliable C-P2WBW-2505 Test Engine
C-P2WBW-2505 Test Engine Practice Test Questions, Exam Dumps
NEW QUESTION # 41
What are benefits of separating master data from transactional data in SAP BW/4HANA? Note: There are 3 correct answers to this question.
- A. Allowing different data load frequency
- B. Providing language-dependent master data texts
- C. Ensuring referential integrity on your transactional data
- D. Reducing the number of database tables
- E. Avoiding generation of SID values
Answer: A,B,C
NEW QUESTION # 42
You create a report with SAP Crystal Reports for Enterprise and need an analysis view as a data source. Which tool can you use to create this analysis view?
- A. SAP Analysis for Microsoft Office
- B. SAP Crystal Reports for Enterprise
- C. SAP BusinessObjects Web Intelligence
- D. SAP Lumira, designer edition
Answer: C
NEW QUESTION # 43
For which requirements do you suggest an SAP HANA modeling focus rather than an SAP BW/4HANA modeling focus? Note: There are 2 correct answers to this question.
- A. Loading snapshots or deltas from different sources on a periodic basis
- B. Finding the best match using a fuzzy search
- C. Leveraging SQL in-house knowledge
- D. Reporting on a harmonized set of master data
Answer: B,C
NEW QUESTION # 44
Which data deletion options are offered for a Standard DataStore Object (advanced)? Note: There are 3 correct answers to this question.
- A. Request-based data deletion
- B. Selective deletion including data of subsequent targets
- C. Deletion of all data from active table only
- D. Deletion of data from all tables
- E. Selective deletion of data
Answer: A,D,E
NEW QUESTION # 45
For which scenarios do you use the SAP HANA model focus? Note: There are 2 correct answers to this question.
- A. Define ABAP Managed Database Procedures in data flows
- B. Build views and procedures using SQL script
- C. Define calculations using geospatial functions
- D. Load snapshots using ABAP CDS Views
Answer: A,B
NEW QUESTION # 46
What does a CompositeProvider allow you to do in SAP BW/4HANA? Note: There are 3 correct answers to this question.
- A. Join two ABAP CDS views
- B. Combine InfoProviders using Joins and Unions
- C. Integrate SAP HANA calculation views
- D. Define new restricted key figures
- E. Create new calculated fields
Answer: B,C,E
NEW QUESTION # 47
You want to create a restricted column in an SAP HANA HDI calculation view.
What do you need to define? Note: There are 2 correct answers to this question.
- A. A condition criterion
- B. An aggregation method
- C. A reference to an existing measure
- D. An SAP HANA data type
Answer: A,C
NEW QUESTION # 48
With SAP BW/4HANA, the new HANA-optimized business content is designed according to the LSA++ framework. Which technical namespace is assigned to identify the new SAP ERP-related business content?
- A. /CPME/
- B. /BW4/
- C. /IMO/
- D. /SFA/
Answer: C
NEW QUESTION # 49
What is the maximum number of reference characteristics that can be used for one key figure with a multi-dimensional exception aggregation in a BW query?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 50
You notice that an SAP ERP ODP SAP DataSource is delivering incorrect values into the first persistent data layer in SAP BW/4HANA Which options do you have to analyze a potential extractor issue? Note: There are 2 correct answers to this question.
- A. Use the program RODPS_REPL_TEST in SAP ERP
- B. Use the transaction ODQMON (Monitor Delta Queues) in SAP BW/4HANA
- C. Check entries in the table RSDDSTATEXTRACT in SAP ERP
- D. Use the transaction RSA3 (Extractor checker) in SAP ERP
Answer: A,D
NEW QUESTION # 51
What is the request handling default setting for error handling in a data transfer process (DTP) in SAP BW/4HANA?
- A. Request is canceled, records are not tracked, and target is not updated.
- B. Request is canceled, first incorrect record is tracked, and target is not updated.
- C. Request is set to failed, error stack is written, and valid records are updated.
- D. Request is set to success, error stack is written, and valid records are updated.
Answer: A
NEW QUESTION # 52
In an SAP HANA HDI Calculation View, you need to combine attributes data (left table) and the data's language-dependent texts (right table) using a text join. What should you select to restrict the result set to the logon language?
- A. The language column in the left table
- B. The logon language in the left table
- C. The join cardinality between both tables
- D. The language column in the right table
Answer: D
NEW QUESTION # 53
You define a remote subscription of type UPSERT in an SAP HANA Smart Data Integration (SDI) real-time update scenario.
Which fields are added to the DataSource automatically? Note: There are 3 correct answers to this question.
- A. SDI_CHANGE_TIME
- B. SDI_CHANGE_TYPE
- C. SDI_RECORD_MODE
- D. SDI_CHANGE_SEQUENCE
- E. SDI_ENTITY_COUNTER
Answer: A,B,C
NEW QUESTION # 54
For which use case would you need to model a transitive attribute?
- A. Load attributes using the enhanced master data update
- B. Generate a transient provider for a BW query on master data attributes
- C. Report on navigational attributes of navigational attributes
- D. Store time-dependent snapshots of master data attributes
Answer: C
NEW QUESTION # 55
You use InfoObject B as a display attribute for InfoObject A. Which object properties prevent you from changing InfoObject B into a navigational attribute for InfoObject A? Note: There are 3 correct answers to this question.
- A. InfoObject B is defined as a Key Figure.
- B. Data Type "Character String" is set in InfoObject A.
- C. Conversion Routine "ALPHA" is set in InfoObject
- D. High Cardinality is set in InfoObject
- E. Attribute Only is set in InfoObject
Answer: C,D,E
NEW QUESTION # 56
In a DataStore object (advanced) of type Data Mart, which request-based deletion is possible?
- A. Only the most recent request in the active data table
- B. Any not activated request in the inbound table
- C. Any request in the active data table
- D. Only the most recent not activated request in the inbound table
Answer: D
NEW QUESTION # 57
Why should you run an SAP HANA delta merge? Note: There are 2 correct answers to this question.
- A. To improve the read performance of InfoProviders
- B. To move the most recent data from disk to memory
- C. To decrease memory consumption
- D. To combine the query cache from different executions
Answer: A,C
NEW QUESTION # 58
You need to derive an architecture overview model from a key figure matrix.
Which is the first step you need to take?
- A. Define data marts
- B. Analyze storage requirements
- C. Identify transformations
- D. Identify sources
Answer: A
NEW QUESTION # 59
Your company manufactures products with country-specific serial numbers.
For this scenario, you have created 3 custom characteristics with the technical names "PRODUCT", "COUNTRY" and "SERIAL_NO". How do you need to model the characteristic "PRODUCT" to store different attribute values for serial numbers?
- A. Use "COUNTRY" as a navigation attribute for "PRODUCT".
- B. Use "SERIAL_NO" as compounding characteristic for "PRODUCT".
- C. Use "COUNTRY" as compounding characteristic for "PRODUCT".
- D. Use "SERIAL_NO" as a transitive attribute for "PRODUCT".
Answer: B
NEW QUESTION # 60
You created a generic DataSource in SAP ERP, but did not release the DataSource for Operational Data Provisioning (ODP). What is the effect in SAP BW/4HANA?
- A. The ODP DataSource has to be created using the ODP HANA source system type.
- B. The ODP DataSource cannot be replicated using the ODP_SAP source system type.
- C. The ODP DataSource can be generated using the DataFlow generation feature.
- D. The ODP DataSource has to be created using the ODP_SAP source system type.
Answer: B
NEW QUESTION # 61
You create a DataStore object (advanced) using the "Data Mart DataStore Object" modeling property. Which behaviors are specific to this modeling property? Note: There are 2 correct answers to this question.
- A. Reporting is done based on a union of the inbound and active tables.
- B. The change log table will be filled only after data activation.
- C. Query results are shown only when data has been activated.
- D. The records are treated as if all characteristics are in the key.
Answer: A,D
NEW QUESTION # 62
Which of the following are possible delta-specific fields for a generic DataSource in SAP ERP? Note: There are 3 correct answers to this question.
- A. Request ID
- B. Time stamp
- C. Calendar day
- D. Record mode
- E. Numeric pointer
Answer: B,C,E
NEW QUESTION # 63
What are the possible ways to fill a pre-calculated value set (bucket)? Note: There are 3 correct answers to this question.
- A. By referencing a table
- B. By using a transformation and data transfer process (DTP)
- C. By using a query (update value set by query)
- D. By accessing an SAP HANA HDI Calculation View of data category Dimension
- E. By entering the values manually
Answer: A,C,E
NEW QUESTION # 64
Which features of an SAP BW/4HANA InfoObject are intended to reduce physical data storage space? Note: There are 2 correct answers to this question.
- A. Compounding characteristic
- B. Transitive attribute
- C. Enhanced master data update
- D. Reference characteristic
Answer: B,D
NEW QUESTION # 65
......
100% Free C-P2WBW-2505 Daily Practice Exam With 82 Questions: https://testking.practicedump.com/C-P2WBW-2505-exam-questions.html