[Dec 12, 2024] Get Unlimited Access to NS0-184 Certification Exam Cert Guide
Reliable Study Materials for NS0-184 Exam Success For Sure
The NS0-184 exam covers a range of topics, including NetApp hardware installation and configuration, NetApp software installation and configuration, and NetApp storage system troubleshooting. NS0-184 exam is divided into two parts: a written exam and a lab exam. The written exam consists of multiple-choice questions that test the candidate's knowledge of NetApp storage installation, while the lab exam assesses the candidate's ability to install, configure, and troubleshoot NetApp storage systems in a simulated environment.
NEW QUESTION # 33
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. At least one LIF per node is required on each cluster.
- B. The LIFs must be in dedicated broadcast domains an IPspaces.
- C. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
- D. The LIFs must use the default intercluster service policy.
Answer: B,D
NEW QUESTION # 34
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?
- A. Active IQ Config Advisor
- B. Active IQ Unified Manager
- C. Cloud Manager
- D. ONTAP System Manager
Answer: D
NEW QUESTION # 35
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
- A. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
- B. Assign all data LIFs to Node 1.
- C. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
- D. Perform a takeover of Node 2 to ensure that it does not run.
Answer: B
NEW QUESTION # 36
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
- A. Use ports with different chipsets.
- B. Use ports from different NICs.
- C. Use ports with the same chipsets.
- D. Use ports from the same NICs.
Answer: B,C
NEW QUESTION # 37
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure DNS on the cluster.
- B. Configure a trap host on the cluster.
- C. Configure an SNMP community string on the cluster.
- D. Configure a firewall policy and allow SNMP.
Answer: A,B
NEW QUESTION # 38
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 4
- B. Option 2
- C. Option 1
- D. Option 3
Answer: B
NEW QUESTION # 39
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. shelf connectivity
- B. cluster switch cabling
- C. data switch cabling
- D. node CPU utilization
Answer: A,D
NEW QUESTION # 40
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.
Which three tools do you need to complete this installation? (Choose three.)
- A. additional network cables
- B. laptop computer
- C. cable management tray
- D. slide rail kit
- E. Phillips #2 screwdriver
Answer: A,B,E
NEW QUESTION # 41
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. No license is required.
- B. A subscription license is required.
- C. A capacity license is required.
- D. A site license is required.
Answer: C
NEW QUESTION # 42
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. Use the cluster image show CLI command.
- B. View the ONTAP System Manager system nodes.
- C. View the ONTAP System Manager cluster settings.
- D. Use the san config show CLI command.
Answer: B,D
NEW QUESTION # 43
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM data LIF
- B. SVM management LIF
- C. intercluster LIF
- D. node management LIF
Answer: C
NEW QUESTION # 44
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?
- A. Interoperability Matrix Tool
- B. Active IQ Unified Manager
- C. Active IQ OneCollect
- D. ONTAP System Manager
Answer: D
NEW QUESTION # 45
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. intercluster SnapMirror
- B. intracluster SnapMirror
- C. remote cluster peering
- D. Epsilon voting
- E. cluster database replication
Answer: A,C,E
NEW QUESTION # 46
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)
- A. cluster certificate
- B. ONTAP certificate
- C. server certificate
- D. root CA certificate
Answer: C,D
NEW QUESTION # 47
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- C. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- D. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
Answer: D
NEW QUESTION # 48
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)
- A. Active IQ Config Advisor
- B. NetApp Documentation Center
- C. Active IQ Digital Advisor
- D. NetApp Knowledge Base
Answer: A,D
NEW QUESTION # 49
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. Active IQ Config Advisor
- B. mysupport.netapp.com site
- C. Interoperability Matrix Tool (IMT)
- D. Hardware Universe (HWU)
Answer: D
NEW QUESTION # 50
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. Flash Pool
- B. thin provisioning
- C. FlashCache
- D. FlexClone volumes
Answer: A,C
NEW QUESTION # 51
Click the Exhibit button.
What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)
- A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
- B. to provide connectivity for NVRAM over iWARP
- C. to enable SyncMirror replication
- D. to install cross-site cluster management switches
Answer: A,B
NEW QUESTION # 52
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node2:e4a and node2:e8a.
- B. Swap node1:e8a and node2:e4a.
- C. Swap node1:e4a and node1:e8a.
- D. Swap node1:e4a and node2:e4b.
Answer: A
NEW QUESTION # 53
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data ports.
In this scenario, which two flow control settings would you verify? (Choose two.)
- A. Verify that the data network ports have full flow control disabled.
- B. Verify that the cluster network ports have full flow control disabled.
- C. Verify that the data network ports have full flow control enabled.
- D. Verify that the cluster network ports have full flow control enabled.
Answer: A,D
NEW QUESTION # 54
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Active IQ Config Advisor
- B. Active IQ Unified Manager
- C. System Diagnostics
- D. Cloud Insights
Answer: C
NEW QUESTION # 55
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)
- A. NSE
- B. NAE
- C. IPsec
- D. NVE
Answer: B,D
NEW QUESTION # 56
......
To earn the NS0-184 certification, candidates must demonstrate a deep understanding of NetApp storage systems and must be able to effectively install and configure these systems. They must also be able to troubleshoot and resolve issues that may arise during installation or configuration.
New Network Appliance NS0-184 Dumps & Questions: https://testking.practicedump.com/NS0-184-exam-questions.html