Latest Jan 02, 2022 300-710 Brain Dump: A Study Guide with Tips & Tricks for passing Exam
300-710 Question Bank: Free PDF Download Recently Updated Questions
Who Can Sit for 300-710?
Particularly, such an exam is for those candidates who are pursuing either the professional-level CCNP Security or the Cisco Certified Specialist - Network Security Firepower designations. To be awarded the latter certificate, all candidates have to nail just 300-710 SNCF test. However, to earn the professional-level CCNP Security certificate, candidates must combine exam 300-710 SNCF with the Cisco 350-701 SCOR, also known as Executing and Operating Cisco Security Core Technologies exam. In all, these certification exams can be taken by people who are looking to validate their IT skills and capabilities. They can also be pursued by those who are looking to acquire new skills that are highly valuable. These Cisco certifications might as well be needed by employees if there has been a change in the law or simply to comply with company requirements. Furthermore, these validations will be perfect for those trying to make their résumés stand out from the competition, which means candidates will be more likely to get hired. To add more, they are perfect for those applicants who are looking to increase the operational efficiency of the company they work for and those looking to receive recognized digital badges for all their social media profiles. As a rule, both of these Cisco certifications have a validity period of 3 years and are to be renewed so they don't expire. Also, neither of these certificates require any formal prerequisites but examinees are expected to have at least three to five years of experience working with the relevant technologies that they will be tested on.
NEW QUESTION 53
Which protocol establishes network redundancy in a switched Firepower device deployment?
- A. STP
- B. VRRP
- C. HSRP
- D. GLBP
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_threat_defense_high_availability.html
NEW QUESTION 54
An engineer runs the command restore remote-manager-backup location 2.2.2.2 admin /Volume/home/admin FTD408566513.zip on a Cisco FMC. After connecting to the repository, the Cisco FTD device is unable to accept the backup file. What is the reason for this failure?
- A. The backup file extension was changed from .tar to .zip.
- B. The backup file is not in .cfg format.
- C. The directory location is incorrect.
- D. The wrong IP address is used.
Answer: A
NEW QUESTION 55
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
- A. system generate-troubleshoot
- B. show managers
- C. show configuration session
- D. show running-config | include manager
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepower_Threat_Defense/c_3.html
NEW QUESTION 56
What is a result of enabling Cisco FTD clustering?
- A. All Firepower appliances can support Cisco FTD clustering.
- B. Integrated Routing and Bridging is supported on the master unit.
- C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
- D. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/clustering_for_the_firepower_threat_defense.html
NEW QUESTION 57
An administrator is setting up Cisco Firepower to send data to the Cisco Stealthwatch appliances. The NetFlow_Set_Parameters object is already created, but NetFlow is not being sent to the flow collector. What must be done to prevent this from occurring?
- A. Create a Security Intelligence object to send the data to Cisco Stealthwatch
- B. Add the NetFlow_Add_Destination object to the configuration
- C. Add the NetFlow_Send_Destination object to the configuration
- D. Create a service identifier to enable the NetFlow service
Answer: A
NEW QUESTION 58
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)
- A. IS-IS
- B. static routing
- C. EIGRP
- D. BGP
- E. OSPF
Answer: D,E
NEW QUESTION 59
An engineer configures an access control rule that deploys file policy configurations to security zones or tunnel zones, and it causes the device to restart. What is the reason for the restart?
- A. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.
- B. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
- C. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.
- D. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
Answer: D
NEW QUESTION 60
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address
10.0.0.10, and that has the registration key Cisco123?
- A. configure manager add Cisco123 10.0.0.10
- B. configure manager add 10.0.0.10 Cisco123
- C. configure manager local Cisco123 10.0.0.10
- D. configure manager local 10.0.0.10 Cisco123
Answer: B
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt- nw.html#id_106101
NEW QUESTION 61
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Block
- B. Interactive Block
- C. Allow with Warning
- D. Monitor
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/AC-Rules-Tuning-Overview.html#76698
NEW QUESTION 62
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-display
- B. system support ssl-client-hello-enabled
- C. system support ssl-client-hello-tuning
- D. system support ssl-client-hello-force-reset
Answer: B
NEW QUESTION 63
Which two conditions are necessary for high availability to function between two Cisco FTD devices?
(Choose two.)
- A. The units must be different models if they are part of the same series.
- B. The units must be the same version
- C. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- D. The units must be configured only for firewall routed mode.
- E. The units must be the same model.
Answer: B,E
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699-configure-ftd-high-availability-on-firep.html
NEW QUESTION 64
What is a feature of Cisco AMP private cloud?
- A. It supports security intelligence filtering.
- B. It performs dynamic analysis
- C. It disables direct connections to the public cloud.
- D. It supports anonymized retrieval of threat intelligence
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/security/fireamp-private-cloud-virtual-appliance/datasheet-c78-742267.html
NEW QUESTION 65
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)
- A. Each directly connected network must be on the same subnet.
- B. Bridge groups are supported in both transparent and routed firewall modes.
- C. Bridge groups are supported only in transparent firewall mode.
- D. The BVI IP address must be in a separate subnet from the connected network.
- E. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
Answer: A,B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 66
An engineer is restoring a Cisco FTD configuration from a remote backup using the command restore remote-manager-backup location 1.1.1.1 admin /volume/home/admin BACKUP_Cisc394602314.zip on a Cisco FMG. After connecting to the repository, an error occurred that prevents the FTD device from accepting the backup file. What is the problem?
- A. The backup file is not in .cfg format.
- B. The backup file is too large for the Cisco FTD device
- C. The backup file extension was changed from tar to zip
- D. The backup file was not enabled prior to being applied
Answer: C
NEW QUESTION 67
An organization is using a Cisco FTD and Cisco ISE to perform identity-based access controls. A network administrator is analyzing the Cisco FTD events and notices that unknown user traffic is being allowed through the firewall. How should this be addressed to block the traffic while allowing legitimate user traffic?
- A. Modify the Cisco ISE authorization policy to deny this access to the user.
- B. Add the unknown user in the Malware & File Policy in Cisco FTD.
- C. Add the unknown user in the Access Control Policy in Cisco FTD.
- D. Modify Cisco ISE to send only legitimate usernames to the Cisco FTD.
Answer: C
NEW QUESTION 68
An engineer is using the configure manager add <FMC IP> Cisc402098527 command to add a new Cisco FTD device to the Cisco FMC; however, the device is not being added. Why Is this occurring?
- A. DONOTRESOLVE must be added to the command
- B. The registration key is missing from the command
- C. The NAT ID is required since the Cisco FMC is behind a NAT device.
- D. The IP address used should be that of the Cisco FTD. not the Cisco FMC.
Answer: C
NEW QUESTION 69
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. unavailable
- B. clean
- C. disconnected
- D. unknown
Answer: D
NEW QUESTION 70
A company is in the process of deploying intrusion prevention with Cisco FTDs managed by a Cisco FMC. An engineer must configure policies to detect potential intrusions but not block the suspicious traffic. Which action accomplishes this task?
- A. Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the "Drop when inline" option.
- B. Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the "Drop when inline" option.
- C. Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the "Drop when inline" option.
- D. Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the "Drop when inline" option.
Answer: B
NEW QUESTION 71
What are the minimum requirements to deploy a managed device inline?
- A. inline interfaces, security zones, MTU, and mode
- B. passive interface, security zone, MTU, and mode
- C. inline interfaces, MTU, and mode
- D. passive interface, MTU, and mode
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config- guide-v65/ips_device_deployments_and_configuration.html
NEW QUESTION 72
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- B. The system performs intrusion inspection followed by file inspection.
- C. They can block traffic based on Security Intelligence data.
- D. File policies use an associated variable set to perform intrusion prevention.
- E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Access
NEW QUESTION 73
Which license type is required on Cisco ISE to integrate with Cisco FMC pxGrid?
- A. plus
- B. apex
- C. base
- D. mobility
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_0111.html#concept_DE1C38E055794B198ED352D1528B5182
NEW QUESTION 74
A security engineer is configuring an Access Control Policy for multiple branch locations. These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location. Which technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?
- A. utilizing a dynamic Access Control Policy that updates from Cisco Talos
- B. utilizing policy inheritance
- C. creating a unique Access Control Policy per device
- D. creating an Access Control Policy with an INSIDE_NET network object and object overrides
Answer: D
NEW QUESTION 75
......
New 300-710 Exam Dumps with High Passing Rate: https://testking.practicedump.com/300-710-exam-questions.html