[Sep 25, 2022] Fully Updated VCP-NV (2V0-41.20) Certification Sample Questions
Latest VMware 2V0-41.20 Real Exam Dumps PDF
Introduction to Professional VMware NSX-T Data Center 2V0-41.20 Exam
This is a 70-item test with a passing score of 300 using a scaled system is the Professional VMware NSX-T Data Center 2V0-41.20 Exam that leads to VMware Certified Professional-Network Virtualization 2020 certification. An appointment time of 105 minutes is given to candidates, which includes five-minute seating time and ample time for non-native English speakers to complete the test. The total length of the exam is 100 minutes.
This is a proctored exam distributed worldwide at Pearson VUE testing centres. Visit the Pearson VUE Web site for more information.
Professional VMware NSX-T Data Center 2V0-41.20 Exam Certified Professional salary
The estimated average salary of Professional VMware NSX-T Data Center 2V0-41.20 certified professional is listed below:
- Europe: 80,000 EURO
- England: 72,000 POUND
- United States: 95,000 USD
- India: 7,028,000 INR
NEW QUESTION 11
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is created.
- B. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- C. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
Answer: D
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BE
NEW QUESTION 12
Which two logical router components span across all transport nodes? (Choose two.)
- A. DISTRIBUTED_ROUTER_TIER0
- B. DISTRIBUTED_ROUTER_TIER1
- C. SERVICE_ROUTER_TIER0
- D. SERVICE_ROUTER_TIER1
- E. TIER0_DISTRIBUTED_ROUTER
Answer: A,B
NEW QUESTION 13
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. esxcli system syslog config logger set --id=nsxmanager
- B. set support-bundle file vcpnv.tgz
- C. vm-support
- D. get support-bundle file vcpnv.tgz
Answer: D
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 14
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
- A. Add a local endpoint.
- B. Configure an IPsec session.
- C. Add a logical switch.
- D. Configure a distributed firewall policy.
- E. Create an IPsec service.
Answer: A,B,E
NEW QUESTION 15
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
NEW QUESTION 16
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. esxcli system syslog config logger set --id=nsxmanager
- B. set support-bundle file vcpnv.tgz
- C. vm-support
- D. get support-bundle file vcpnv.tgz
Answer: C
NEW QUESTION 17
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)
- A. The virtual machines running on the KVM Transport Node are not connected to the VDS.
- B. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
- C. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
- D. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
- E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.
Answer: C,E
NEW QUESTION 18
Where are Distributed Firewall logs containing access decisions stored?
- A. NSX Edge
- B. Hypervisor transport node
- C. NSX API
- D. NSX Manager
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html
NEW QUESTION 19
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh show <VM Name> | grep interfaceid
- B. virsh dumpxml <VM Name> | grep interfaceid
- C. virsh list-interface <VM Name>
- D. virsh get-interface <VM Name>
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 20
An NSX administrator has configured a KVM hypervisor as a transport node.
Which kernel module on KVM implements a N-VDS?
- A. nsx-vswitch
- B. dyswitch
- C. openvswitch
- D. etherswitch
Answer: C
NEW QUESTION 21
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. can have a maximum of 10 edge nodes
- C. must have only active-active edge nodes
- D. must contain only one type of edge nodes (VM or bare metal)
- E. can have a maximum of 8 edge nodes
Answer: A,B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html
NEW QUESTION 22
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. esxcli system syslog config logger set --id=nsxmanager
- B. set support-bundle file vcpnv.tgz
- C. vm-support
- D. get support-bundle file vcpnv.tgz
Answer: D
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION 23
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
- B. esxcli network diag ping -H <destination IP address>
- C. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- D. esxcli network diag ping -I vmk0 -H <destination IP address>
Answer: C
NEW QUESTION 24
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. SYSTEM
- B. MONITORING
- C. FABRIC
- D. GROUPING
Answer: C
NEW QUESTION 25
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?
- A. Deployment of Distributed Router.
- B. Deployment of T0 and T1
- C. Deployment of Distributed Load Balancing service.
- D. Deployment of T1 with NLB service.
Answer: C
NEW QUESTION 26
Which three can an administrator define in a transport node profile? (Choose three.)
- A. Uplink Profile
- B. VDS switch configuration
- C. Segment
- D. N-VDS switch configuration
- E. Segment Profile
- F. Logical Router
Answer: A,B,D
NEW QUESTION 27
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. esxcli system syslog config logger set --id=nsxmanager
- B. set support-bundle file vcpnv.tgz
- C. vm-support
- D. get support-bundle file vcpnv.tgz
Answer: D
NEW QUESTION 28
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. VLAN Uplink
- B. Service interface
- C. Downlink interface
- D. Loopback Router Port
Answer: B
Explanation:
Explanation
"The service interface is a special-purpose port to enable services for mainly VLAN-based networks.
North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink"
NEW QUESTION 29
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Distribution
- B. Graceful Restart
- C. Route Aggregation
- D. BGP Neighbors
- E. Local AS
Answer: C,D
Explanation:
Explanation
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
NEW QUESTION 30
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Multiprotocol Border Gateway Protocol (MP-BGP)
- B. Multiprotocol Label Switching (MPLS)
- C. Open Shortest Path First (OSPF)
- D. Virtual Routing and Forwarding (VRF)
- E. Virtual Extensible Local Area Network (VXLAN)
Answer: D,E
NEW QUESTION 31
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in hours.
- B. An alarm can be suppressed for a specific duration in days.
- C. An alarm can be suppressed for a specific duration in minutes.
- D. An alarm can be suppressed for a specific duration in seconds.
Answer: B
NEW QUESTION 32
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. Traceflow
- B. IPFIX
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) - C. Port Mirroring
- D. SPAN mirrors
Answer: A
NEW QUESTION 33
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. vrf 4
- C. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- D. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- E. vrf 3
- F. vrf 1
Answer: C,E
NEW QUESTION 34
Which three functions require a Services Router (SR) component on an Edge node? (Choose three.)
- A. Distributed Routing
- B. Service Insertion
- C. Packet Forwarding
- D. Virtual Private Network
- E. Distributed Firewall
- F. Gateway Firewall
Answer: B,D,F
NEW QUESTION 35
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. get timezone
- B. set ntp-server
- C. set timezone
- D. et time-server
Answer: B
NEW QUESTION 36
......
For more info read reference:
VMware 2V0-41.20 Dumps - Secret To Pass in First Attempt: https://testking.practicedump.com/2V0-41.20-exam-questions.html